Do you know the correct operation steps of aluminum extrusion machine?

Do you know the correct operation steps of aluminum extrusion machine? The reason why it is called aluminum profile extruder is that it is a kind of equipment for extruding aluminum profiles, so this set of equipment needs skilled personnel to operate. We have compiled the next three operating steps to share with you, which is also the knowledge that an operator must know.

Correct operation steps of aluminum profile extruder:

1. First, make preparations

The work of aluminum profile extruder shall be fully prepared before startup. In addition to properly installing the equipment and preparing the raw materials to be extruded, all systems in the equipment shall be inspected to ensure that there are no abnormalities.

2. Next is the operation of the equipment

When the extruder reaches the constant temperature state, it can be started. In order to eliminate the difference between the thermal expansion of the bolt and the head, the head and flange bolts should be tightened once as much as possible. Pay attention when driving. Slowly rotate the screw speed adjustment knob, slowly start the screw speed, then gradually speed up and add a small amount of materials. In the process of extrusion production, the process parameters should be checked regularly to ensure the quality of profile products.

3. You can then turn off the device

If the work is completed, the aluminum profile extruder can be ready to be shut down. However, when the raw materials in the extruder are extruded to expose the screw, the power supply of the barrel and head can be turned off and the heating can be stopped. Then dismantle and clean all parts of the equipment, and finally apply oil to prevent rusting.